How to Start a Home Perfume Business

Here’s some helpful information to get you started, and you can find much more on the internet.

Perfumes must have an aromatic component that can be natural, such as a flower extract, extracts of various plant materials, or essential oils. Or it could be synthetic, as found in most of the more affordable perfumes on sale today.

Perfume fragrances do not need to be made from scratch. If you want to start a home-based perfume business, it is much easier to purchase a fragrance from a perfume supply company. There is a very wide variety available.

This fragrance base must be diluted to make it more usable. Undiluted, it will be difficult to apply, too strong, and can even irritate the skin. Therefore, the fragrance must be diluted with a suitable solvent. Dilution ratios of 10%-20% fragrance (90%-80% solvent) are typically used. To make an oil-based perfume, the perfume must be diluted with an oil that has no fragrance of its own. This is usually jojoba oil. Oil-based perfumes are not normally sprayed. They rub or roll.

In the most common types of perfume, the fragrance is diluted with a solvent that is mainly ethyl alcohol. This makes the perfume very easy to spray using a pump atomizer and the alcohol evaporates on the skin, leaving the fragrance behind. If you are starting a business, this solvent can be purchased from the perfumery supply company where you purchased the fragrance. The solvent will usually have a few other ingredients besides the alcohol to make it work better. After you have mixed the fragrance with the alcoholic solvent, you should leave it for at least 48 hours or more before bottling. If there is a sediment, it can be strained into a coffee filter.

If you want to sell your perfume successfully, the packaging and appearance of the perfume bottles are just as important as the fragrance. Take your time choosing the bottles and designing the labeling. The quality of the spray pump is critical, so that the user does not experience any difficulties. Most first-time perfume packers use screw-top atomizers, but quickly discover that some of the bottles are leaking, then graduate to crimping pumps. Atomizer crimp bottles and pumps are available from many vendors and can also be imported at a fairly low price, although care must be taken with quality. Stick to the 15mm FEA neck finisher to start. It looks neat and is the most common size. The next difficulty is finding an affordable crimper that will produce a high quality crimp finish and seal the bottle correctly.

For well-tested, affordable crimpers NOT sourced in the Far East, visit http://www.bottlecrimptools.com